LM3704XDMM-232/NOPB Overview
This power management consists of 10 mounting terminals on which it can be mounted. Packaging is in the form of a Tape & Reel (TR). There are 1 functions included in this PMIC so that you can refer to them. There are 2 channels available on this supervisor, and each channel has a different function. In this PMIC, you can find 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) functions for your reference. There are a lot of similarities between this IC power and other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. A supply voltage of 1.2V is used to conduct the PMIC chip. IC management conducts in a 1-voltage supply. Surface Mount is the one that mounts power management. Power Management Circuits is a subcategory of this PMIC chip. 10 pins make up the power management. There should be a minimum voltage supply (Vsup) of 1V for this PMIC. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type for IC management is Surface Mount. We recommend setting the supervisors to -40°C~85°C TJ degrees. While in operation, this supervisor has a voltage output of Push-Pull, Totem Pole. It is always advisable to use LM3704, the base supervisor number, when searching for similar PMICs from the manufacturer.
LM3704XDMM-232/NOPB Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
LM3704XDMM-232/NOPB Applications
There are a lot of Texas Instruments LM3704XDMM-232/NOPB Voltage Supervisors applications.
- Radio
- Digitally controlled LDO regulators circuit
- Leakage protection
- Display equipment
- Radar
- WiFi router
- Detection of phase imbalance
- Automotive permanent magnet synchronous motors
- Smart meter
- Precision measurement
