MAX6307UK35D3+T Overview
This voltage supervisor has a total of 5 mounting terminals that can be used for mounting. This power ic is packaged in a way that looks like a Tape & Reel (TR). The purpose of this IC management is to provide you with a reference of 1 functions. This power management is made up of 1 channels which are available in a series format. The purpose of this IC power is to provide you with a reference of SC-74A, SOT-753 functions. As with other Multi-Voltage Supervisor products, this IC management also offers a wide range of benefits. Specifies a reflow peak temperature of 260 for the package during reflow. There is a voltage supply of 2 for the PMIC chip, and the chip conducts at that voltage. By Surface Mount, IC management has been mounted. This power ic can be sub-categorized as Power Management Circuits. It has a total of 5 pins that are attached to IC management. There are 5 pins on the power managment ic. IC management can only work with a supply voltage of 1V volts. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Surface Mount mounting is recommended. Temperature setting for the supervisors should be 0°C~70°C TA. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. For this power management, there is an 8μA volt supply current. It is always advisable to use MAX6307, the base supervisor number, when searching for similar PMICs from the manufacturer.
MAX6307UK35D3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1V
8μA operating supply current
MAX6307UK35D3+T Applications
There are a lot of Maxim Integrated MAX6307UK35D3+T Voltage Supervisors applications.
- Personal computers
- Dash board
- Household appliances
- Telecommunications equipment
- Digitally controlled LDO regulators circuit
- Detection of phase loss
- Power distribution systems of infant care room
- Sensitive sensors
- Medical-specific isolation transformer
- Detection of phase imbalance
