MAX6865UK21D4L+T Overview
As you can see, this power management is mounted through 5 terminals. It is packaged with Tape & Reel (TR). Power management is possible to find a series of 1 functions. Power management consists of 1 channels, each of which can be used independently. To assist you, this PMIC includes SC-74A, SOT-753 functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. The package peak reflow temperature is specified to be 260. A supply voltage of 2.5V is used to conduct the PMIC chip. During operation, the power ic is supplied with a voltage of 1. Surface Mount is the one that mounts power management. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. In total, IC powers are 5 pins on the board. Power managment ic pin count is 5. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.1V, which is the minimum supply voltage that should be applied. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. In this case, Surface Mount is the recommended mounting type. This power management is the recommended temperature range for the supervisors: -40°C~85°C TA. When this power management system is in operation, it produces an output voltage of Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 7μA. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX6865, which is the base power ics number.
MAX6865UK21D4L+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6865UK21D4L+T Applications
There are a lot of Maxim Integrated MAX6865UK21D4L+T Voltage Supervisors applications.
- Radar
- Display equipment
- Leakage protection
- Unattended substation automation
- Battery cars
- Power distribution systems of operating room
- Functional modules
- Automotive power systems
- Rechargeable batteries
- DSP
