MAX491ECPD+ Overview
LED drivers benefit from this IC's enhanced 14-DIP (0.300, 7.62mm) package.There is a Tube package for this receiver.It has proved to be a valuable component for a variety of applications since it is a Transceiver can transceiver.PCBs or development boards with Through Hole-types can accommodate this wide receiver.This differential driver requires a 4.75V~5.25V power supply.As many as 1/1 eligible receivers/drivers can be used simultaneously with this electronic part.Applications with operating temperatures of 0°C~70°C have been designed primarily for this ic receiver.Driver ICs in this category can operate efficiently with a supply voltage range of 5V.Wide receiver has 14 terminations built in for driving or receiving signals from data.A package consisting of 14 market standard pinouts is provided with this integrated circuit.Since the base part number MAX491 describes the product type, temperature, package, etc., you might get more options by searching with it.An enhanced power dissipation control is provided by this 14-pin driver IC.In terms of resolution, this ic receiver was capable of providing a 1-bit resolution.This receiver is typically specified with a resolution of 1 bits. A Line Driver or Receivers subcategory can be assigned to this rf transceiver module.There is one driver IC that is designed to operate from a 5V power supply, and only one driver IC in total.The optical transceiver module's VCC pin should receive enough input current, but not more than 0.5mA.
MAX491ECPD+ Features
Tube package
14 pin count
14 pins
5V power supply
MAX491ECPD+ Applications
There are a lot of Maxim Integrated MAX491ECPD+ Drivers/Receivers/Transceivers applications.
- Radio transmission
- Tuner
- Ship
- Datacom networking applications
- Carrier phase observations
- Bar, KTV wireless entertainment
- Shortwave receiver
- Fiber optic cable connection network
- Gigabit Ethernet
- IP cameras
