Name: MAX490EEPA+
Brand: Maxim Integrated
SKU: MAX490EEPA+
Price: 8.52000 USD
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	8-DIP (0.300, 7.62mm)
Number of Pins	8
Operating Temperature	-40°C~85°C
Packaging	Tube
Published	2012
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Type	Transceiver
Terminal Finish	Matte Tin (Sn)
Subcategory	Line Driver or Receivers
Max Power Dissipation	727mW
Technology	CMOS
Voltage - Supply	4.75V~5.25V
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	2.54mm
Base Part Number	MAX490
Pin Count	8
Output Voltage	12.5V
Operating Supply Voltage	5V
Power Supplies	5V
Interface	RS-422, RS-485
Nominal Supply Current	500μA
Logic Function	Receiver, Transceiver
Data Rate	2.5Mbps
Output Characteristics	TOTEM-POLE
Differential Output	YES
Output Polarity	COMPLEMENTARY
Protocol	RS422, RS485
Input Characteristics	DIFFERENTIAL SCHMITT TRIGGER
Number of Drivers/Receivers	1/1
Driver Number of Bits	1
Receiver Number of Bits	1
Duplex	Full
Receiver Hysteresis	70mV
Number of Transceivers	1
Simplex/Duplex	Full Duplex
Transmit Delay-Max	60 ns
Output Low Current-Max	0.004A
High Level Input Current-Max	0.000002A
Height Seated (Max)	4.572mm
Length	9.375mm
Width	7.62mm
Radiation Hardening	No
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MAX490EEPA+ Product Details

MAX490EEPA+ Overview

This driver chip is excellent for driving common LEDs due to its enhanced 8-DIP (0.300, 7.62mm) package.Tube package is used for this receiver.This Transceiver can transceiver is a versatile part that has enabled many solutions to serve a variety of purposes.On any Through Hole-type PCB or development board, you can install this wide receiver.Power supply requirements for this differential driver are 4.75V~5.25V.As many as 1/1 receivers/drivers are eligible for use on this electronic part.As its name implies, this ic receiver is designed for applications where -40°C~85°C is the operating temperature.There is a voltage range of 5V for this line driver ic, so it can operate efficiently.8 terminations are integrated into this wide receiver for driving and receiving signals from data.As a standard package, this transceiver comes with a 8-pin layout that follows the market standard.MAX490 is the base part number for this part, and it identifies the product type, temperature, packaging, etc., so you can search for more variants with it.Wide receiver with enhanced power dissipation control, 8-pin.Through optical transceiver downsizing and high-density Through Hole mounting technologies, its package size is reduced dramatically.There is a capability of 1-bit resolution with this ic receiver.There is usually a 1-bit resolution specified for this receiver when it is used.An input voltage supply of 5V is required to operate the transceiver module.There is a subcategory called Line Driver or Receivers for this rf transceiver module.Driver ICs such as this one are designed to operate from 5V power sources.ICs implement a total of 1 transceivers.There is a capabilWide receivery to deliver voltage at 12.5V wWide receiverh this device.