MAX475EPD Overview
The linear amplifier is packaged in a 14-DIP (0.300, 7.62mm) case. Op amps are General Purpose types of amplifier on the chip. There is a Tube case that is delivered with the instrumentation amplifiers. The number of terminations approaches 14. There are a total of 14 pins on this op amp. Please take in mind that op amp should be run at 5V. A type of Operational Amplifiers op amp ic can be identified by the fact that this is a type of Operational Amplifiers device. There is an input offset voltage of 800μV for this buffer op amp. For this electrical component, the recommended mounting type is Through Hole, which is the most common. With regard to operating temperature, this op amp functions well at -40°C~85°C. This op amp can operate from a supply current at 2mA. There should be no change in the voltage gain at 110dB. There are 4 circuits on this op amp. As one of the many benefits of this buffer amplifier, it puts out Rail-to-Rail signals, which is one of the many benefits it offers. The operating supply voltage of instrumentation amplifier is rated 5V voltage.
MAX475EPD Features
14 Pins
supply voltage of 5V
110dB voltage gain
Output Type: Rail-to-Rail
MAX475EPD Applications
There are a lot of Maxim Integrated MAX475EPD Instrumentational OP Amps applications.
- Weak signal detection
- E-book readers
- Power control
- Strain gauges
- Large motor controllers
- Test equipment
- Professional videography
- PDA
- Ultrasound transducers
- Hand-held batteries
