INA159AMDGKTEP Overview
Op amp is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case. A Differential-type buffer amplifier is shown here. A Tape & Reel (TR) case is used to deliver the buffer op amp. A total of 8 terminations have been reported in the past few weeks. A total of 8 pins are attached to buffer op amp. It is important to remember that this op amp should be operated at a voltage of 5V volts. This particular linear amplifier is a type of Operational Amplifier device, to be precise. In total, the buffer amplifier consists of 8 pins. With regard to input offset voltage, instrumentation amplifier is rated at 100μV. This electrical part should be mounted using type Surface Mount. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -55°C~125°C . You can run this op amp ic on 1.1mA . Voltage gain should remain at 13.98dB. There are 1 circuits on this op amp. There are 2 channels on the operational amplifiers. The instrumentation amplifier is packed in the form of TR. The current is quiescent at 1.1mA. It is important that the op amp resistance stays within the range of 240kOhm.
INA159AMDGKTEP Features
8 Pins
supply voltage of 5V
13.98dB voltage gain
Resistance of 240kOhm
INA159AMDGKTEP Applications
There are a lot of Texas Instruments INA159AMDGKTEP Instrumentational OP Amps applications.
- Thermocouples
- Multiplication circuits
- Biopotential
- Medical imaging
- Laptop
- Television
- Navigation
- Active probe
- Subtraction operation circuits
- Oscilloscopes
