Name: MAX4753EGE+T
Brand: Maxim Integrated
SKU: MAX4753EGE+T
Availability: InStock

new-10%

MAX4753EGE+T

Manufacturer part number:MAX4753EGE+T

Manufacturer:Maxim Integrated

Description:30ns, 25ns SPST - NO/NC 900mOhm QUAD Analog Switches BREAK-BEFORE-MAKE MAX4753 16 Pins 2.5nA 1.8V 16-VFQFN Exposed Pad

Case Package:SOT-23

Datasheet:MAX4753EGE+T Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-VFQFN Exposed Pad
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2002
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	900mOhm
Terminal Finish	TIN
Subcategory	Multiplexer or Switches
Max Power Dissipation	1.349W
Technology	CMOS
Terminal Position	QUAD
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	1.8V
Terminal Pitch	0.65mm
Base Part Number	MAX4753
Output	SEPARATE OUTPUT
Pin Count	16
Operating Supply Voltage	3V
Number of Channels	1
Number of Circuits	4
Max Supply Voltage	3.6V
Min Supply Voltage	1.6V
Operating Supply Current	1μA
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	35 ns
Supply Type	Single
Turn-Off Delay Time	25 ns
On-State Resistance (Max)	900mOhm
Multiplexer/Demultiplexer Circuit	1:1
Current - Leakage (IS(off)) (Max)	2.5nA
Channel Capacitance (CS(off), CD(off))	31pF 30pF
On-state Resistance Match-Nom	0.05Ohm
Switch Circuit	SPST - NO/NC
Switch Time (Ton, Toff) (Max)	30ns, 25ns
Charge Injection	21pC
Channel-to-Channel Matching (ΔRon)	30m Ω
Crosstalk	-80dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+)	1.6V~3.6V
Height Seated (Max)	1mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

MAX4753EGE+T Product Details

MAX4753EGE+T Overview

The electronic component is convenient to ship overseas because it is packed in a 16-VFQFN Exposed Pad. The advanced packaging method Tape & Reel (TR) provides high reliability. It is mounted in the position Surface Mount. 1:1 is the ratio between multiplexers and demultiplexers. The operating temperature is extended to around -40°C~85°C TA. The total number of terminations is 16. As a result of its 1 channels, this electronic component provides high-quality output. An 1.8V voltage supply should allow the electrical part to be turned on and run. A total of 16 pins are injected into the body of the electronic part. Based on SPST - NO/NC switching circuits, these analog multiplexers work. The multiplexer consists of 4 circuits. Use MAX4753 to search for variants of the digital switches. The internal resistance of this digital multiplexer is 900mOhm. Datasheets for functions of 16 pins are available. Multiplexer or Switches is a typical switch device. normally, users should not supply switches with voltages higher than 3.6V. Analogue multiplexer with a Single supply type that is cost-effective. A low voltage of 1.6V should be applied to the electronic component. This multiplexer would work with 1μA current. Using only a single voltage supply, this analog switch requires 1.6V~3.6V voltage. If you put voltage higher than 1μA on the digital multiplexer, damage may occur. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. A voltage of 3V can be used to operate the electronic component.