Name: ADG602BRTZ-REEL
Brand: Hotenda
SKU: ADG602BRTZ-REEL
Availability: InStock

new-10%

ADG602BRTZ-REEL

Manufacturer part number:ADG602BRTZ-REEL

Manufacturer:Hotenda

Description:120ns, 75ns SPST - NC 2.5Ohm Analog Switches BREAK-BEFORE-MAKE ADG602 6 Pins 250pA 5V SOT-23-6

Case Package:SOT-23

Datasheet:ADG602BRTZ-REEL Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mounting Type	Surface Mount
Package / Case	SOT-23-6
Surface Mount	YES
Number of Pins	6
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	6
ECCN Code	EAR99
Resistance	2.5Ohm
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature	CAN ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY
Subcategory	Multiplexer or Switches
Max Power Dissipation	10μW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	5V
Terminal Pitch	0.95mm
Reach Compliance Code	unknown
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	ADG602
Pin Count	6
Qualification Status	Not Qualified
Number of Channels	1
Max Supply Voltage	5.5V
Min Supply Voltage	2.7V
Power Dissipation	10μW
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	120 ns
Voltage - Supply, Single/Dual (±)	2.7V~5.5V ±2.7V~5.5V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	75 ns
Max Dual Supply Voltage	5.5V
-3db Bandwidth	180MHz
On-State Resistance (Max)	2.5Ohm
Min Dual Supply Voltage	2.7V
Dual Supply Voltage	5V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	60 dB
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	50pF 50pF
On-state Resistance Match-Nom	0.35Ohm
Switch Circuit	SPST - NC
Switch Time (Ton, Toff) (Max)	120ns, 75ns
Charge Injection	250pC
Switching	BREAK-BEFORE-MAKE
Normal Position	NC
Length	2.9mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG602BRTZ-REEL Product Details

ADG602BRTZ-REEL Overview

Due to its SOT-23-6 packaging, the electronic part is convenient for international shipping. High reliability is achieved by using advanced packaging method Tape & Reel (TR). Mounted in Surface Mount is this multiplexer. Multiplexers and demultiplexers have the same number of circuits 1:1. Operation at a temperature around -40°C~85°C TA. A total of 6 terminations have been recorded. The electronic part delivers high-quality output through its 1 channels. Turning on and running the electrical part should be easy with a 5V voltage supply. Electronic part bodies are injected with 6 pins. SPST - NC switching circuits are used in these analog switch ics. ADG602 can be used to search for analog multiplexer variants. Internally, this switch multiplexer has a resistance of 2.5Ohm. You can find the functions of the 6 pins in the datasheets. A analogue multiplexer of this type is a Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. Digital switch that provides Dual, Single power at a cost-effective price. In order for the electronic part to function properly, the lowest voltage should be 2.7V. It may damage the digital multiplexer if the voltage is higher than 1μA. It is possible to supply this switch device with dual voltages. However, it is not advisable to exceed 5.5V. If you are using a dual power supply, you should attach at least 2.7V. Additional features include: CAN ALSO OPERATE WITH 2.7V TO 5.5V SINGLE SUPPLY.