Name: ADG528AKP
Brand: Hotenda
SKU: ADG528AKP
Price: 6.67000 USD
Availability: InStock

new-10%

ADG528AKP

Manufacturer part number:ADG528AKP

Manufacturer:Hotenda

Description:300ns, 300ns 450Ohm QUAD Analog Switches BREAK-BEFORE-MAKE ADG528 20 Pins 1nA 15V 20-LCC (J-Lead)

Case Package:SOT-23

Datasheet:ADG528AKP Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mounting Type	Surface Mount
Package / Case	20-LCC (J-Lead)
Surface Mount	YES
Number of Pins	20
Operating Temperature	-40°C~85°C TA
Packaging	Tube
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	20
ECCN Code	EAR99
Resistance	450Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	470mW
Technology	CMOS
Terminal Position	QUAD
Terminal Form	J BEND
Peak Reflow Temperature (Cel)	225
Number of Functions	1
Supply Voltage	15V
Reach Compliance Code	not_compliant
[email protected] Reflow Temperature-Max (s)	30
Base Part Number	ADG528
Pin Count	20
Qualification Status	Not Qualified
Operating Supply Voltage	15V
Number of Channels	8
Interface	Parallel
Number of Circuits	1
Max Supply Voltage	16.5V
Min Supply Voltage	10.8V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Operating Supply Current	1.5mA
Power Dissipation	28mW
Throw Configuration	DPST
Propagation Delay	300 ns
Turn On Delay Time	450 ns
Number of Inputs	8
Voltage - Supply, Single/Dual (±)	10.8V~16.5V ±10.8V~16.5V
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	450 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	450Ohm
Min Dual Supply Voltage	10.8V
Multiplexer/Demultiplexer Circuit	8:1
Off-state Isolation-Nom	68 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	5pF 22pF
On-state Resistance Match-Nom	5Ohm
Switch Time (Ton, Toff) (Max)	300ns, 300ns
Charge Injection	4pC
Channel-to-Channel Matching (ΔRon)	22.5 Ω
Switching	BREAK-BEFORE-MAKE
Signal Current-Max	0.02A
Height Seated (Max)	4.57mm
RoHS Status	Non-RoHS Compliant
Lead Free	Contains Lead

ADG528AKP Product Details

ADG528AKP Overview

This electronic part is conveniently packaged in 20-LCC (J-Lead), making it easy to ship abroad. The advanced packaging method Tube provides high reliability. There is an analog multiplexer mounted in position Surface Mount. In the multiplexer and demultiplexer, 8:1 represents the number of circuits. The operating temperature is extended to around -40°C~85°C TA. 20 terminations have been made so far. A high-quality output is provided by the electrical component's 8 channels. With a 15V voltage supply, the electrical component should be turned on and run. There are 20 pins injected into the electronic part body. Circuits number 1 make up this analogue multiplexer. Try searching with ADG528 if you're looking for variants. As far as internal resistance is concerned, it has 450Ohm. The datasheets for the 20 pins explain the functions. Multiplexer or Switches is a typical switch device. A voltage higher than 16.5V should not normally be supplied to the switches. 10.8V is the lowest voltage the electrical component should receive. For this multiplexer to operate, 1.5mA current would be sufficient. For this multiplexer, dual supply voltage is feasible, but it should not exceed 16.5V. You should attach at least 10.8V voltage if you are using dual power supply. Integrated with SINGLE-ENDED MULTIPLEXER analog IC. There is a voltage range of 15V operating voltages for the electrical part. The 8 inputs need to be operated in order to work.