Name: MAX4610CUD+T
Brand: Maxim Integrated
SKU: MAX4610CUD+T
Availability: InStock

new-10%

MAX4610CUD+T

Manufacturer part number:MAX4610CUD+T

Manufacturer:Maxim Integrated

Description:65ns, 28ns SPST - NO 100Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MAX4610 14 Pins 100pA 3V 14-TSSOP (0.173, 4.40mm Width)

Case Package:SOT-23

Datasheet:MAX4610CUD+T Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	14-TSSOP (0.173, 4.40mm Width)
Number of Pins	14
Operating Temperature	0°C~70°C TA
Packaging	Tape & Reel (TR)
Published	2009
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	14
ECCN Code	EAR99
Resistance	100Ohm
Terminal Finish	Matte Tin (Sn)
Additional Feature	ALSO OPERATES AT 5V AND 12V VCC
Subcategory	Multiplexer or Switches
Max Power Dissipation	640mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	3V
Terminal Pitch	0.65mm
[email protected] Reflow Temperature-Max (s)	30
Base Part Number	MAX4610
Output	SEPARATE OUTPUT
Pin Count	14
Operating Supply Voltage	9V
Number of Channels	1
Number of Circuits	4
Max Supply Voltage	12V
Min Supply Voltage	2V
Operating Supply Current	1μA
Nominal Supply Current	1μA
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	47 ns
Supply Type	Single
Turn-Off Delay Time	100 ns
-3db Bandwidth	300MHz
On-State Resistance (Max)	100Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	60 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	16pF 16pF
On-state Resistance Match-Nom	2Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	65ns, 28ns
Charge Injection	1pC
Channel-to-Channel Matching (ΔRon)	1 Ω
Crosstalk	-80dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	90ns
Voltage - Supply, Single (V+)	2V~12V
Normal Position	NO
Height Seated (Max)	1.1mm
Length	5mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

MAX4610CUD+T Product Details

MAX4610CUD+T Overview

As the electronic part is packed in 14-TSSOP (0.173, 4.40mm Width), international shipping is convenient. This packaging method provides high reliability because it uses advanced packaging techniques. Mounted in Surface Mount is this multiplexer. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Temperatures around 0°C~70°C TA are extended for operation. In total, there are 14 terminations. As a result of its 1 channels, this electronic component provides high-quality output. It is safe to turn on and run the electronic component with a 3V voltage supply. This electrical component is included in the 14 series of products. Based on SPST - NO switching circuits, these analog multiplexers work. Circuits number 4 make up this analogue multiplexer. Try searching with MAX4610 to find analog multiplexer variants. A 100Ohm internal resistance characterizes this multiplexer. You can find the functions of the 14 pins in the datasheets. In this analog multiplexer, the value is Multiplexer or Switches. A voltage higher than 12V should not normally be supplied to the switches. Digital switch that provides Single power at a cost-effective price. The lowest voltage fed to the electronic component should be 2V. It would be sufficient to run this analogue multiplexer with 1μA current. This analog switch requires a voltage of 2V~12V to drain from a single voltage supply. It may damage the digital multiplexer if the voltage is higher than 1μA. SEPARATE OUTPUT outputs are utilized by this digital multiplexer. Operating voltages of 9V are compatible with the electrical part. This electronic part has additional features, such as: ALSO OPERATES AT 5V AND 12V VCC.