Name: ADG884BCBZ-REEL
Brand: Hotenda
SKU: ADG884BCBZ-REEL
Availability: InStock

new-10%

ADG884BCBZ-REEL

Manufacturer part number:ADG884BCBZ-REEL

Manufacturer:Hotenda

Description:50ns, 20ns SPDT 370mOhm BOTTOM Analog Switches BREAK-BEFORE-MAKE ADG884 10 Pins 200pA Typ 2.7V 10-UFBGA, WLCSP

Case Package:SOT-23

Datasheet:ADG884BCBZ-REEL Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mounting Type	Surface Mount
Package / Case	10-UFBGA, WLCSP
Surface Mount	YES
Number of Pins	10
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e1
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	3 (168 Hours)
Number of Terminations	10
ECCN Code	EAR99
Resistance	370mOhm
Subcategory	Multiplexer or Switches
Max Power Dissipation	5.5μW
Technology	CMOS
Terminal Position	BOTTOM
Terminal Form	BALL
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	2.7V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	40
Base Part Number	ADG884
Pin Count	10
Number of Outputs	4
Number of Channels	2
Max Supply Voltage	5.5V
Min Supply Voltage	1.8V
Analog IC - Other Type	AUDIO/VIDEO SWITCH
Power Dissipation	5.5μW
Max Supply Current	1μA
Turn On Delay Time	50 ns
Supply Type	Single
Turn-Off Delay Time	20 ns
-3db Bandwidth	18MHz
On-State Resistance (Max)	370mOhm
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	60 dB
Current - Leakage (IS(off)) (Max)	200pA Typ
Channel Capacitance (CS(off), CD(off))	103pF
On-state Resistance Match-Nom	0.02Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	50ns, 20ns
Charge Injection	125pC
Channel-to-Channel Matching (ΔRon)	10m Ω
Crosstalk	-120dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	56ns
Switch-off Time-Max	19ns
Voltage - Supply, Single (V+)	1.8V~5.5V
Height Seated (Max)	0.63mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG884BCBZ-REEL Product Details

ADG884BCBZ-REEL Overview

Shipping overseas is convenient with the electronic component packed in 10-UFBGA, WLCSP. High reliability is provided by advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a ratio of 2:1. Temperatures around -40°C~85°C TA are extended for operation. Total terminations are 10. High-quality output is provided by the electronic component's 2 channels. If the voltage supply is 2.7V volts, the electrical component should be turned on and run. The electronic part body is injected with 10 pins. A SPDT switching circuit is used to build these analog multiplexers. Try searching with ADG884 if you're looking for variants. There is 370mOhm internal resistance in this digital multiplexer. For functions related to 10 pins, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. A voltage higher than 5.5V should not normally be supplied to the switches. Analogue multiplexers of the Single supply type that are cost-effective. 1.8V should be the lowest voltage fed to the electronic component. This analog switch requires a voltage of 1.8V~5.5V to drain from a single voltage supply. The analogue multiplexer may be damaged if voltage is greater than 1μA. It is integrated with AUDIO/VIDEO SWITCH analog ICs. The analogue multiplexer has 4 outputs.