Name: MAX4608ESE+T
Brand: Maxim Integrated
SKU: MAX4608ESE+T
Availability: InStock

new-10%

MAX4608ESE+T

Manufacturer part number:MAX4608ESE+T

Manufacturer:Maxim Integrated

Description:110ns, 150ns SPST - NO 2.5Ohm DUAL Analog Switches MAX4608 16 Pins 500pA 15V 16-SOIC (0.154, 3.90mm Width)

Case Package:SOT-23

Datasheet:MAX4608ESE+T Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Surface Mount	YES
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2012
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	2.5Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	696mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	15V
Base Part Number	MAX4608
Output	SEPARATE OUTPUT
Pin Count	16
JESD-30 Code	R-PDSO-G16
Operating Supply Voltage	18V
Power Supplies	5/30/+-5/+-15V
Number of Channels	1
Number of Circuits	2
Max Supply Voltage	36V
Min Supply Voltage	4.5V
Nominal Supply Current	1nA
Max Supply Current	500nA
Turn On Delay Time	110 ns
Voltage - Supply, Single/Dual (±)	4.5V~36V ±4.5V~20V
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	150 ns
Max Dual Supply Voltage	20V
On-State Resistance (Max)	2.5Ohm
Min Dual Supply Voltage	4.5V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	60 dB
Current - Leakage (IS(off)) (Max)	500pA
Channel Capacitance (CS(off), CD(off))	64pF 64pF
On-state Resistance Match-Nom	0.05Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	110ns, 150ns
Charge Injection	45pC
Channel-to-Channel Matching (ΔRon)	50m Ω
Crosstalk	-66dB @ 1MHz
Normal Position	NO
Height Seated (Max)	1.75mm
Length	9.9mm
Width	3.9mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

MAX4608ESE+T Product Details

MAX4608ESE+T Overview

Shipping overseas is convenient with the electronic component packed in 16-SOIC (0.154, 3.90mm Width). High reliability is ensured by the advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operating temperature extended to -40°C~85°C TA. Total terminations are 16. The electronic part provides high-quality output because it has 1 channels. Powered by a 15V voltage supply, the electrical part should be switched on and run. Electronic part bodies are injected with 16 pins. Unlike digital switches, these are based on SPST - NO switching circuits. There are 2 circuits in this switch device. If you are looking for variants of the digital switch, trying search with MAX4608. This digital multiplexer has 2.5Ohm internal resistance. The analogue multiplexer in this example is a typical Multiplexer or Switches. Multiplexers should not be powered above 36V in normal situations. 4.5V is the lowest voltage the electrical component should receive. When the digital multiplexer is charged above 500nA, damage can occur. For this multiplexer, dual supply voltage is feasible, but it should not exceed 20V. You should attach at least 4.5V voltage if you are using dual power supply. The digital multiplexer has SEPARATE OUTPUT outputs that can be used. Operating voltages of 18V are compatible with the electrical part.