Name: MAX4752EGE+T
Brand: Maxim Integrated
SKU: MAX4752EGE+T
Availability: InStock

new-10%

MAX4752EGE+T

Manufacturer part number:MAX4752EGE+T

Manufacturer:Maxim Integrated

Description:30ns, 25ns SPST - NO 900mOhm QUAD Analog Switches BREAK-BEFORE-MAKE MAX4752 16 Pins 2.5nA 1.8V 16-VFQFN Exposed Pad

Case Package:SOT-23

Datasheet:MAX4752EGE+T Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-VFQFN Exposed Pad
Number of Pins	16
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2012
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	900mOhm
Subcategory	Multiplexer or Switches
Max Power Dissipation	1.349W
Technology	CMOS
Terminal Position	QUAD
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	1.8V
Terminal Pitch	0.65mm
Base Part Number	MAX4752
Pin Count	16
Operating Supply Voltage	3V
Polarity	Non-Inverting
Number of Channels	1
Number of Circuits	4
Max Supply Voltage	3.6V
Min Supply Voltage	1.6V
Operating Supply Current	1μA
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	35 ns
Supply Type	Single
Turn-Off Delay Time	25 ns
On-State Resistance (Max)	900mOhm
High Level Output Current	100mA
Multiplexer/Demultiplexer Circuit	1:1
Current - Leakage (IS(off)) (Max)	2.5nA
Channel Capacitance (CS(off), CD(off))	31pF 30pF
On-state Resistance Match-Nom	0.05Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	30ns, 25ns
Charge Injection	21pC
Channel-to-Channel Matching (ΔRon)	30m Ω
Crosstalk	-80dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+)	1.6V~3.6V
Normal Position	NC
Height Seated (Max)	1mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

MAX4752EGE+T Product Details

MAX4752EGE+T Overview

Shipping overseas is convenient with the electronic component packed in 16-VFQFN Exposed Pad. High reliability is provided by advanced packaging method Tape & Reel (TR). In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a ratio of 1:1. Temperatures around -40°C~85°C TA are extended for operation. Total terminations are 16. High-quality output is provided by the electronic component's 1 channels. If the voltage supply is 1.8V volts, the electrical component should be turned on and run. The electronic part body is injected with 16 pins. A SPST - NO switching circuit is used to build these analog multiplexers. There are 4 circuits in this multiplexer. Try searching with MAX4752 if you're looking for variants. There is 900mOhm internal resistance in this digital multiplexer. For functions related to 16 pins, please refer to the datasheets. Theswitch device is a typical Multiplexer or Switches. A voltage higher than 3.6V should not normally be supplied to the switches. Analogue multiplexers of the Single supply type that are cost-effective. 1.6V should be the lowest voltage fed to the electronic component. For this multiplexer to operate, 1μA current would be sufficient. This analog switch requires a voltage of 1.6V~3.6V to drain from a single voltage supply. The analogue multiplexer may be damaged if voltage is greater than 1μA. 3V operating voltages are supported by the electronic component.