MAX4591CSE Overview
Presented in 16-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. High reliability is ensured by the advanced packaging method Tube. There is an analog multiplexer mounted in position Surface Mount. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Extended operating temperature around 0°C~70°C TA. Total terminations are 16. The electronic part provides high-quality output because it has 1 channels. If the voltage supply is 12V volts, the electrical component should be turned on and run. An injection of 16 pins is performed into the body of the electrical component. A SPST - NC switching circuit is used for these analog switches. A 4 circuit is present in this switch device. Try searching for the analog switch ic with MAX4591 if you are looking for variants. It has an internal resistance of 20Ohm. The datasheets for the 16 pins explain the functions. The analog multiplexer shown here is a typical Multiplexer or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 16V. The lowest voltage the electronic part should receive is 3V. This analog switch requires a voltage of 3V~16V to drain from a single voltage supply. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. Additional features of the electronic component include: CAN ALSO OPERATES AT 15 V SUPPLY, OVERVOLTAGE PROTECTION.
MAX4591CSE Features
1 Channels
Switch Circuit: SPST - NC
Additional Features: CAN ALSO OPERATES AT 15 V SUPPLY, OVERVOLTAGE PROTECTION
MAX4591CSE Applications
There are a lot of Maxim Integrated MAX4591CSE Analog Switches & Multiplexers ICs applications.
- Fault Tolerant Systems
- Microprocessor Controlled Analog Systems
- Central office
- Communication systems
- Communication systems
- ATM
- Imaging
- Battery Powered Systems
- Digital Cross-Connects
- ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
