Name: DG418DY-E3
Brand: Vishay Siliconix
SKU: DG418DY-E3
Price: 2.45000 USD
Availability: InStock

new-10%

DG418DY-E3

Manufacturer part number:DG418DY-E3

Manufacturer:Vishay Siliconix

Description:175ns, 145ns SPST - NO 35Ohm Analog Switches BREAK-BEFORE-MAKE DG418 8 Pins 250pA 15V 8-SOIC (0.154, 3.90mm Width)

Case Package:SOT-23

Datasheet:DG418DY-E3 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	14 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Weight	540.001716mg
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2012
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	8
Resistance	35Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	400mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	265
Number of Functions	1
Supply Voltage	15V
[email protected] Reflow Temperature-Max (s)	40
Base Part Number	DG418
Pin Count	8
Operating Supply Voltage	15V
Number of Channels	1
Max Supply Voltage	36V
Min Supply Voltage	13V
Operating Supply Current	1nA
Nominal Supply Current	1nA
Power Dissipation	400mW
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	175 ns
Number of Inputs	1
Voltage - Supply, Single/Dual (±)	12V ±15V
Supply Type	Dual, Single
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	145 ns
Max Dual Supply Voltage	22V
On-State Resistance (Max)	35Ohm
Min Dual Supply Voltage	7V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	1:1
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	8pF 8pF
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	175ns, 145ns
Charge Injection	60pC
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	250ns
Drain to Source Resistance	20mOhm
Normal Position	NO
Height	1.55mm
Length	5mm
Width	4mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

DG418DY-E3 Product Details

DG418DY-E3 Overview

The electronic component is convenient to ship overseas because it is packed in a 8-SOIC (0.154, 3.90mm Width). High reliability is ensured by the advanced packaging method Tube. The multiplexer is located in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. Operating temperature extended to -40°C~85°C TA. There are 8 terminations totally. As a result of its 1 channels, this electronic component provides high-quality output. It is safe to turn on and run the electronic component with a 15V voltage supply. Electronic part bodies are injected with 8 pins. Multiplexers built on a SPST - NO switching circuit are built. Using the DG418 search parameter, you can discover variants of the switch. There is 35Ohm internal resistance in this digital multiplexer. Datasheets for 8 pin functions are available upon request. It is a typical Multiplexer or Switches analog multiplexer. In a normalsituation, users should not supply the switches with voltage higher than 36V. A analog switch ic that has a cost-effective Dual, Single supply type. There should be 13V voltage fed to the electrical part below 13V. An operating current of 1nA would be sufficient for this switch device. If you put voltage higher than 1μA on the digital multiplexer, damage may occur. There is no problem with using dual supply voltage, but it should not exceed 22V. A dual power supply should have at least 7V voltage attached. This electrical part is compatible with 15V operating voltages. It is possible to operate 1 inputs. There is 20mOhm Drain to Source resistance on this electronic part.