Name: MAX4552EPE
Brand: Maxim Integrated
SKU: MAX4552EPE
Availability: InStock

new-10%

MAX4552EPE

Manufacturer part number:MAX4552EPE

Manufacturer:Maxim Integrated

Description:110ns, 90ns SPST - NO 120Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MAX4552 16 Pins 1nA 5V 16-DIP (0.300, 7.62mm)

Case Package:SOT-23

Datasheet:MAX4552EPE Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Mounting Type	Through Hole
Package / Case	16-DIP (0.300, 7.62mm)
Surface Mount	NO
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	1999
JESD-609 Code	e0
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
Resistance	120Ohm
Terminal Finish	Tin/Lead (Sn85Pb15)
Subcategory	Multiplexer or Switches
Technology	CMOS
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	240
Number of Functions	4
Supply Voltage	5V
Reach Compliance Code	not_compliant
Time@Peak Reflow Temperature-Max (s)	20
Base Part Number	MAX4552
Output	SEPARATE OUTPUT
Pin Count	16
JESD-30 Code	R-PDIP-T16
Qualification Status	Not Qualified
Power Supplies	3/5/+-5V
Number of Channels	1
Number of Circuits	4
Voltage - Supply, Single/Dual (±)	2V~12V ±2V~6V
Neg Supply Voltage-Nom (Vsup)	-5V
On-State Resistance (Max)	120Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	90 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	3.5pF 3pF
On-state Resistance Match-Nom	1Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	110ns, 90ns
Charge Injection	2pC
Channel-to-Channel Matching (ΔRon)	1 Ω
Crosstalk	-90dB @ 100kHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	125ns
Switch-off Time-Max	100ns
Normal Position	NC
Length	19.175mm
Width	7.62mm
RoHS Status	Non-RoHS Compliant

MAX4552EPE Product Details

MAX4552EPE Overview

Shipping overseas is convenient with the electronic component packed in 16-DIP (0.300, 7.62mm). High reliability is provided by advanced packaging method Tube. In Through Hole, this analog switch is mounted. Multiplexers and demultiplexers have a ratio of 1:1. Temperatures around -40°C~85°C TA are extended for operation. Total terminations are 16. High-quality output is provided by the electronic component's 1 channels. If the voltage supply is 5V volts, the electrical component should be turned on and run. The electronic part body is injected with 16 pins. A SPST - NO switching circuit is used to build these analog multiplexers. There are 4 circuits in this multiplexer. Try searching with MAX4552 if you're looking for variants. There is 120Ohm internal resistance in this digital multiplexer. Theswitch device is a typical Multiplexer or Switches. The analog switch ic utilizes SEPARATE OUTPUT outputs in total.