Name: DG2537DQ-T1-GE3
Brand: Vishay Siliconix
SKU: DG2537DQ-T1-GE3
Availability: InStock

new-10%

DG2537DQ-T1-GE3

Manufacturer part number:DG2537DQ-T1-GE3

Manufacturer:Vishay Siliconix

Description:30ns, 35ns SPST - NO 4.5Ohm Analog Switches BREAK-BEFORE-MAKE DG2537 10 Pins 250pA 3V 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)

Case Package:SOT-23

Datasheet:DG2537DQ-T1-GE3 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	12 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Number of Pins	10
Weight	143.193441mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Published	2013
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	10
Resistance	4.5Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	320mW
Technology	CMOS
Terminal Form	GULL WING
Number of Functions	2
Supply Voltage	3V
Terminal Pitch	0.5mm
Base Part Number	DG2537
Output	SEPARATE OUTPUT
Pin Count	10
Number of Channels	1
Number of Circuits	2
Max Supply Voltage	4.3V
Min Supply Voltage	1.25V
Operating Supply Current	2μA
Max Supply Current	2μA
Throw Configuration	SPST
Turn On Delay Time	35 ns
Voltage - Supply, Single/Dual (±)	2.6V~4.3V ±2.5V
Supply Type	Dual, Single
Turn-Off Delay Time	20 ns
Max Dual Supply Voltage	2.75V
-3db Bandwidth	366MHz
On-State Resistance (Max)	4.5Ohm
Min Dual Supply Voltage	1.25V
Dual Supply Voltage	2.5V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	67 dB
Current - Leakage (IS(off)) (Max)	250pA
Channel Capacitance (CS(off), CD(off))	8pF 9pF
On-state Resistance Match-Nom	0.3Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	30ns, 35ns
Charge Injection	2.2pC
Channel-to-Channel Matching (ΔRon)	200m Ω
Crosstalk	-90dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Switch-on Time-Max	55ns
Switch-off Time-Max	40ns
Normal Position	NO
Height	950μm
Length	3mm
Width	3.1mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant

DG2537DQ-T1-GE3 Product Details

DG2537DQ-T1-GE3 Overview

As the electronic part is packed in 10-TFSOP, 10-MSOP (0.118, 3.00mm Width), international shipping is convenient. The advanced packaging method Tape & Reel (TR) provides high reliability. Mounted in Surface Mount is this multiplexer. There is 1:1 ratio between the number of multiplexers and demultiplexers. Operation at a temperature around -40°C~85°C TA. The total number of terminations is 10. A electrical component with 1 channels is capable of high-quality output. When the electronic component is given a voltage of 3V, it should be turned on and run. There are 10 pins injected into the electronic part body. Based on SPST - NO switching circuits, these analog multiplexers work. A 2 circuit is present in this switch device. If you are looking for variants of the digital switch, trying search with DG2537. It has an internal resistance of 4.5Ohm. To find out what the functions of 10 pins are, please refer to their datasheets. There is Multiplexer or Switches analog multiplexer like this in the world. In normalcircumstances, users should not exceed 4.3V volts for the multiplexer. The digital multiplexer has a low cost Dual, Single supply. 1.25V is the lowest voltage that should be fed to the electronic electronic part. An operating current of 2μA would be sufficient for this switch device. A voltage higher than 2μA may cause damage to the switch multiplexer. There is no problem with using dual supply voltage, but it should not exceed 2.75V. If you are using a dual power supply, you should attach at least 1.25V. The outputs of this digital multiplexer are SEPARATE OUTPUT in number.