ADG526AKRZ-REEL Overview
Due to its 28-SOIC (0.295, 7.50mm Width) packaging, the electronic part is convenient for international shipping. This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). Surface Mount is where this multiplexer is located. Multiplexer and demultiplexer circuits have a number 16:1. Temperatures around -40°C~85°C TA are extended for operation. 28 terminations have been made so far. A 16 channel electronic part produces high-quality output. It is safe to turn on and run the electronic component with a 15V voltage supply. It is part of the design of the 28 series that this electronic component is included. Circuits number 1 make up this analogue multiplexer. Try searching for the analog switch ic with ADG526 if you are looking for variants. The internal resistance of this digital multiplexer is 450Ohm. The functions of 28 pins can be found in the datasheets. Multiplexers should not be powered above 16.5V in normal situations. Analogue multiplexers of the Dual, Single supply type that are cost-effective. A low voltage of 10.8V should be applied to the electronic component. In order to operate this switch device, it would need a current of 600μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 16.5V. It is recommended that you attach at least 10.8V to your dual power supply. The electrical part can be operated at 15V voltage levels.
ADG526AKRZ-REEL Features
16 Channels
600μA Supply Current
ADG526AKRZ-REEL Applications
There are a lot of Analog Devices Inc. ADG526AKRZ-REEL Analog Switches & Multiplexers ICs applications.
- Voice over IP/DSL – Integrated Access Devices, Smart
- Signal routing between systems
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Fiber to the Home
- Video signal routing
- Cable PC
- Fiber In The Loop (FITL)
- Avionics
- Cellular phones
- Industrial control systems
