Name: ADG4612BRUZ-REEL7
Brand: Hotenda
SKU: ADG4612BRUZ-REEL7
Price: 6.04000 USD
Availability: InStock

new-10%

ADG4612BRUZ-REEL7

Manufacturer part number:ADG4612BRUZ-REEL7

Manufacturer:Hotenda

Description:73ns, 91ns SPST - NO 5.1Ohm Analog Switches MAKE-BEFORE-BREAK ADG4612 16 Pins 10nA 5V 16-TSSOP (0.173, 4.40mm Width)

Case Package:SOT-23

Datasheet:ADG4612BRUZ-REEL7 Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	8 Weeks
Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	16
Operating Temperature	-40°C~105°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	5.1Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	7.2mW
Technology	CMOS
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	NOT SPECIFIED
Number of Functions	4
Supply Voltage	5V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	NOT SPECIFIED
Base Part Number	ADG4612
Output	SEPARATE OUTPUT
Pin Count	16
Qualification Status	Not Qualified
Polarity	Non-Inverting
Number of Channels	1
Interface	Parallel
Max Supply Voltage	12V
Min Supply Voltage	3V
Test Frequency	1MHz
Power Dissipation	7.2mW
Max Supply Current	140μA
Turn On Delay Time	125 ns
Number of Inputs	4
Voltage - Supply, Single/Dual (±)	3V~12V ±3V~5.5V
Supply Type	Dual, Single
Bandwidth	250MHz
Neg Supply Voltage-Nom (Vsup)	-5V
Turn-Off Delay Time	125 ns
Max Dual Supply Voltage	5.5V
On-State Resistance (Max)	5.1Ohm
Min Dual Supply Voltage	3V
Dual Supply Voltage	5V
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	54 dB
Current - Leakage (IS(off)) (Max)	10nA
Channel Capacitance (CS(off), CD(off))	11.5pF 11.5pF
On-state Resistance Match-Nom	0.05Ohm
Switch Circuit	SPST - NO
Switch Time (Ton, Toff) (Max)	73ns, 91ns
Insertion Loss (dB)	-0.27 dB
Charge Injection	292pC
Channel-to-Channel Matching (ΔRon)	50m Ω
Crosstalk	-74dB @ 1MHz
Switching	MAKE-BEFORE-BREAK
Normal Position	NO
Height Seated (Max)	1.2mm
Length	5mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

ADG4612BRUZ-REEL7 Product Details

ADG4612BRUZ-REEL7 Overview

Due to its 16-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, this analog switch is mounted. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operating temperature around -40°C~105°C TA extended. In total, 16 terminations have occurred. A high-quality output is provided by the electrical component's 1 channels. If the voltage supply is 5V volts, the electrical component should be turned on and run. This electronic part can be found in the 16 series. Circuits based on SPST - NO switching are used to construct these analog switch ics. Try searching for the analog switch ic with ADG4612 if you are looking for variants. As far as internal resistance is concerned, it has 5.1Ohm. Please refer to the datasheets for 16 pins functions. There is Multiplexer or Switches analog multiplexer like this in the world. In a normalsituation, users should not supply the switches with voltage higher than 12V. Digital switch that provides Dual, Single power at a cost-effective price. There should be 3V voltage fed to the electrical part below 3V. If put voltage greater than 140μA on the device, damage may be caused to the analogue multiplexer. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 5.5V. If you are using dual power supplies, you should attach at least 3V. In this switch multiplexer, there are SEPARATE OUTPUT outputs available. In order to operate the 4 inputs, there are several steps to follow. In 250MHz-bandwidths, data can be transferred.