MAX391EPE Overview
The electrical component comes in 16-DIP (0.300, 7.62mm) packaging, which makes it convenient to ship overseas. To ensure high reliability, a new packaging method Tube is used. In Through Hole, you'll find this switch device. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operating temperature around -40°C~85°C TA extended. In total, 16 terminations have occurred. A electrical component with 1 channels is capable of high-quality output. When the electronic component is given a voltage of 5V, it should be turned on and run. Into the electrical component body are injected 16 pins. On the other hand, analog switches can be constructed using SPST - NC switching circuits. Circuits number 4 make up this analogue multiplexer. Look for analog switch ic variants by searching with MAX391. A 35Ohm internal resistance characterizes this multiplexer. The analog multiplexer shown here is a typical Multiplexer or Switches. An abnormal situation would be for the switch device to be supplied with a voltage greater than 15V. A analog switch ic that has a cost-effective Dual, Single supply type. It is recommended to use 3V as the lowest voltage for the electrical part. The analogue multiplexer could operate on 1μA current. For this switch, a dual supply voltage is feasible, but it must not exceed 8VFor dual power supplies, a voltage of at least 3V should be attached. It is possible to use SEPARATE OUTPUT outputs on this digital multiplexer.
MAX391EPE Features
1 Channels
Switch Circuit: SPST - NC
1μA Supply Current
MAX391EPE Applications
There are a lot of Maxim Integrated
MAX391EPE Analog Switches & Multiplexers ICs applications.
- Audio and video switching
- Automatic test equipment
- Precision data acquisition
- Battery-powered systems
- Sample-and-hold systems
- Communication systems
- Data Acquisition Systems
- Relay Replacement
- Battery Powered Systems
- Existing multiplexer applications (both fault-protected and nonfault-protected)
