Name: DG4053AEQ-T1-E3
Brand: Vishay Siliconix
SKU: DG4053AEQ-T1-E3
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Contact Plating	Tin
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-TSSOP (0.173, 4.40mm Width)
Number of Pins	16
Supplier Device Package	16-TSSOP
Weight	172.98879mg
Operating Temperature	-40°C~125°C TA
Packaging	Tape & Reel (TR)
Published	2000
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Resistance	100Ohm
Max Operating Temperature	125°C
Min Operating Temperature	-40°C
Max Power Dissipation	450mW
Base Part Number	DG4053
Number of Outputs	3
Number of Channels	3
Number of Circuits	3
Max Supply Voltage	12V
Min Supply Voltage	2.7V
Operating Supply Current	-1μA
Nominal Supply Current	50nA
Power Dissipation	450mW
Max Supply Current	1μA
Propagation Delay	172 ns
Turn On Delay Time	151 ns
Logic Function	Multiplexer
Number of Inputs	6
Voltage - Supply, Single/Dual (±)	2.7V~12V ±2.5V~5V
Supply Type	Dual, Single
Bandwidth	730MHz
Turn-Off Delay Time	138 ns
Max Dual Supply Voltage	5V
-3db Bandwidth	730MHz
On-State Resistance (Max)	100Ohm
Min Dual Supply Voltage	2.5V
High Level Output Current	30mA
Dual Supply Voltage	3V
Multiplexer/Demultiplexer Circuit	2:1
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	3pF 4pF
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	108ns, 92ns
Charge Injection	0.25pC
Channel-to-Channel Matching (ΔRon)	3Ohm
Crosstalk	-67dB @ 10MHz
Height	920μm
Length	5.07mm
Width	4.4mm
REACH SVHC	Unknown
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

DG4053AEQ-T1-E3 Product Details

DG4053AEQ-T1-E3 Overview

Due to its 16-TSSOP (0.173, 4.40mm Width) packaging, the electronic part is convenient for international shipping. A high level of reliability can be achieved through the use of an advanced packaging method Tape & Reel (TR). The multiplexer is located in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Extended operating temperature around -40°C~125°C TA. By its 3 channels, the electronic component provides high-quality output. SPDT switching circuits are used in these analog switch ics. A 3 circuit is present in this switch device. If you are looking for variants of the digital switch, trying search with DG4053. An switch multiplexer with 100Ohm internal resistance has a value of 100Ohm. Datasheets for 16 pin functions are available upon request. It is normally recommended that users do not supply the multiplexer with voltages higher than 12V. A analog switch ic that has a cost-effective Dual, Single supply type. There should be 2.7V voltage fed to the electrical part below 2.7V. The switch device would be able to operate with -1μA current. A voltage higher than 1μA may cause damage to the switch multiplexer. Despite this switch device's dual supply capability, its voltage should not exceed 5V. In the case of dual power supplies, you should connect at least 2.5V. Operating 6 inputs is required. The data can be transferred over a wide range of bandwidths, called 730MHz bandwidths. A temperature above 125°C is not suitable for operation of the analogue multiplexer. The analogue multiplexer has 3 outputs. It is offered by suppliers in package 16-TSSOP.