MAX322CPA+ Overview
Shipping overseas is convenient with the electronic component packed in 8-DIP (0.300, 7.62mm). The advanced packaging method Tube provides high reliability. Multiplexers like this are mounted in the Through Hole position. 1:1 is the ratio between multiplexers and demultiplexers. Operational temperature extended around 0°C~70°C TA. In total, 8 terminations have occurred. A electrical component with 1 channels is capable of high-quality output. With a 5V voltage supply, the electrical component should be turned on and run. A key feature of the 8 series is the inclusion of this electronic part as part of its design. Circuits based on SPST - NO/NC switching are used to construct these analog switch ics. This multiplexer is composed of 2 circuits. Try searching with MAX322 to find analog multiplexer variants. In this multiplexer, the internal resistance is 35Ohm. For details about the functions of 8 pins, please refer to the datasheets. In a normalsituation, users should not supply the switches with voltage higher than 8V. A cost-effective Dual supply type analogue multiplexer. It is recommended to use 2.7V as the lowest voltage for the electrical part. This multiplexer would work with 1μA current. Put voltage above 125μA on the multiplexer to cause damage. There is no problem with using dual supply voltage, but it should not exceed 8V. In the case of dual power supplies, you should connect at least 2.7V.
MAX322CPA+ Features
1 Channels
Switch Circuit: SPST - NO/NC
1μA Supply Current
MAX322CPA+ Applications
There are a lot of Maxim Integrated MAX322CPA+ Analog Switches & Multiplexers ICs applications.
- Medical systems
- USB 1.1 signal switching circuits
- Industrial and process control systems
- Cable Telephony – NIU, Set-Top Box, Home Side Box
- Industrial
- Relay Replacement
- Sample hold systems
- HDTV
- DVD-R
- Precision instrumentation
