Name: MAX4736ETC+
Brand: Maxim Integrated
SKU: MAX4736ETC+
Price: 3.39000 USD
Availability: InStock

new-10%

MAX4736ETC+

Manufacturer part number:MAX4736ETC+

Manufacturer:Maxim Integrated

Description:25ns, 20ns SPDT 800mOhm QUAD Analog Switches BREAK-BEFORE-MAKE MAX4736 12 Pins 1nA 3V 12-WFQFN Exposed Pad

Case Package:SOT-23

Datasheet:MAX4736ETC+ Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	12-WFQFN Exposed Pad
Number of Pins	12
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2012
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	12
ECCN Code	EAR99
Resistance	800mOhm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	444mW
Technology	CMOS
Terminal Position	QUAD
Peak Reflow Temperature (Cel)	260
Number of Functions	2
Supply Voltage	3V
Terminal Pitch	0.5mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	MAX4736
Output	SEPARATE OUTPUT
Pin Count	12
Power Supplies	1.8/3V
Number of Channels	1
Number of Circuits	2
Max Supply Voltage	3.6V
Min Supply Voltage	1.6V
Operating Supply Current	1μA
Nominal Supply Current	1μA
Turn On Delay Time	30 ns
Supply Type	Single
Turn-Off Delay Time	25 ns
-3db Bandwidth	130MHz
On-State Resistance (Max)	800mOhm
Multiplexer/Demultiplexer Circuit	2:1
Off-state Isolation-Nom	52 dB
Current - Leakage (IS(off)) (Max)	1nA
Channel Capacitance (CS(off), CD(off))	33pF 60pF
On-state Resistance Match-Nom	0.1Ohm
Switch Circuit	SPDT
Switch Time (Ton, Toff) (Max)	25ns, 20ns
Charge Injection	60pC
Channel-to-Channel Matching (ΔRon)	100m Ω
Crosstalk	-78dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+)	1.6V~4.2V
Height Seated (Max)	0.9mm
Length	3mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant

MAX4736ETC+ Product Details

MAX4736ETC+ Overview

Packed in 12-WFQFN Exposed Pad, the electronic component is convenient for shipping overseas. Advanced packaging method Tube is used to provide high reliability. This analog switch is mounted in Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 2:1. Extended operating temperature around -40°C~85°C TA. There are 12 terminations totally. By its 1 channels, the electronic component provides high-quality output. With a 3V voltage supply, the electrical component should be turned on and run. 12 pins are injected to the electronic part body. These analog multiplexers are built based on SPDT switching circuits. This multiplexer is composed of 2 circuits. If you are looking for variants of the digital switch, trying search with MAX4736. This digital multiplexer has 800mOhm internal resistance. Please refer to the datasheets for 12 pins functions. This switch device is a typical Multiplexer or Switches. In a normalsituation, users should not supply the switches with voltage higher than 3.6V. A cost-effective Single supply type analogue multiplexer. The lowest voltage fed to the electronic component should be 1.6V. 1μA current would be enough for this multiplexer to operate. Draining from a single voltage supply, this analog switch requires a voltage of 1.6V~4.2V. This analog switch ic utilizes SEPARATE OUTPUT output.