ADG702LBRJZ-REEL7 Overview
Due to its SC-74A, SOT-753 packaging, the electronic part is convenient for international shipping. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. Multiplexers like this are mounted in the Surface Mount position. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. Operation at a temperature around -40°C~85°C TA. In total, there have been 5 terminations. A electrical component with 1 channels is capable of high-quality output. Turning on and running the electrical part should be easy with a 3V voltage supply. A total of 5 pins are injected into the body of the electronic part. These analog multiplexers are built based on SPST - NC switching circuits. Using the ADG702 search parameter, you can discover variants of the switch. Analog switches have 3Ohm internal resistance. Datasheets for 5 pin functions are available upon request. It is a typical Multiplexer or Switches analog multiplexer. In normalcircumstances, users should not exceed 5.5V volts for the multiplexer. An effective Single supply digital multiplexer. In order for the electronic part to function properly, the lowest voltage should be 1.8V. The analogue multiplexer could operate on 1nA current. This analogue multiplexer requires a voltage of 1.8V~5V when it drains from a single voltage supply. When the digital multiplexer is charged above 1pA, damage can occur. Operating 1 inputs is required.
ADG702LBRJZ-REEL7 Features
1 Channels
Switch Circuit: SPST - NC
1nA Supply Current
-3db Bandwidth: 200MHz
ADG702LBRJZ-REEL7 Applications
There are a lot of Analog Devices Inc. ADG702LBRJZ-REEL7 Analog Switches & Multiplexers ICs applications.
- Precision instrumentation
- Audio and video signal routing
- Automatic test equipment
- Digital Cross-Connects
- E1 Multiplexer
- SONET/SDH ADM
- Modems
- PDAs
- Video signal routing
- Multiplexers
