MAX17058G+ Overview
This power IC uses an analog IC called POWER SUPPLY SUPPORT CIRCUIT. Channels are available on 1. There are 8 pins on it. The smart tools battery is packaged in a Strip case. To mount this electronic component, use Surface Mount. The minimum supply voltage for this electrical part should not be less than 2.5V volts. It is recommended that the power IC's supply voltage not exceed 4.5V volts. It should not be less than -40°C in order to activate this power management IC. Temperatures below 85°C are recommended for its use. It is not permitted to exceed 0.04mA for the maximum supply current (Isup). The operating supply voltage for this power management IC is specified as 4.5V. The supply current is 23μA volts.
MAX17058G+ Features
with 8 Pins
Output Voltage at the range of 400mV
MAX17058G+ Applications
There are a lot of Maxim Integrated
MAX17058G+ Battery Management ICs applications.
- Electric cars
- Trucks
- Non-road type vehicles
- Golf carts
- Electric-powered machinery
- Fork lifts
- Grid power infrastructure
- Cell phone towers
- A/C power substations
- Internet infrastructure equipment
