MAX16074RS27D2+T Overview
This power management consists of 4 mounting terminals on which it can be mounted. It is packaged with Tape & Reel (TR). There are 4-WFBGA, CSPBGA functions included in this PMIC so that you can refer to them. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. There is a voltage supply of 1 for the PMIC chip, and the chip conducts at that voltage. Power management is included in the Surface Mount mount. This power ic can be sub-categorized as Power Management Circuits. The pins of the power management system count 4. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.2V, which is the minimum supply voltage that should be applied. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. In this case, Surface Mount is the recommended mounting type. The supervisors should be set to the following temperature: -40°C~85°C. During normal operation, this power managment ic can generate Open Drain or Open Collector of output voltage. To find similar IC managements from the manufacturer, you can always search by MAX16074.
MAX16074RS27D2+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
MAX16074RS27D2+T Applications
There are a lot of Maxim Integrated MAX16074RS27D2+T Voltage Supervisors applications.
- Personal computers
- Important electronics for automotive protection
- Urban rail transit weak current power monitoring
- emergency room
- Power distribution systems of ICU
- Fire equipment power monitoring system
- Multi-voltage system
- Analog circuit
- Medical-specific insulation monitor
- Medical-specific isolation transformer
