MAX6864UK26D3L+T Overview
As you can see, this power management is mounted through 5 terminals. There is a Tape & Reel (TR)-packaging method applied to IC management. Please refer to this PMIC for 1 functions. There are 1 channels on this power managment ic that can be found in a series. In this IC management you will find SC-74A, SOT-753 functions for you to refer to. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. Specifies a reflow peak temperature of 260 for the package during reflow. The supervisor is always powered by a 2.5V volt supply. When 1 is applied to the power ic, it conducts. Surface Mount mounts IC management. Power Management Circuits is a subcategory of this PMIC chip. It has a total of 5 pins that are attached to IC management. This power management has 5 pins. IC management can only work with a supply voltage of 1.1V volts. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. In this case, Surface Mount is the recommended mounting type. It is recommended to set the supervisor's temperature to this range: -40°C~85°C. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. For this power management, there is an 7μA volt supply current. You can always use MAX6864, the base supervisor number, to search for similar PMICs of the manufacturer.
MAX6864UK26D3L+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6864UK26D3L+T Applications
There are a lot of Maxim Integrated MAX6864UK26D3L+T Voltage Supervisors applications.
- Battery-powered equipment
- Personal computers
- Efficient information transmission
- Data storage applications
- Electronics installed in the vehicle
- Automotive permanent magnet synchronous motors
- Military communications
- Detection of phase imbalance
- WiFi router
- Microcontroller system
