MAX16072RS21D2+T Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 4 in total. It is packaged with Tape & Reel (TR). IC management is packaged as a 4-WFBGA, CSPBGA package. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. When 1 is applied to the power ic, it conducts. The power management is mounted by a Surface Mount-axis. It is possible to subcategorize this power ic as a Power Management Circuits chip. 4 pins make up the power management. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.2V. The supply voltage (Vsup) should not exceed 5.5V volts in this IC power. A Surface Mount mounting type is recommended. The supervisors should be set to the following temperature: -40°C~85°C. During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX16072, which is the base power ics number.
MAX16072RS21D2+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
MAX16072RS21D2+T Applications
There are a lot of Maxim Integrated MAX16072RS21D2+T Voltage Supervisors applications.
- Insulation fault location system
- Digitally controlled LDO regulators circuit
- Battery cars
- Power communication system
- Stable power system
- Data storage applications
- Consumer electronics
- External alarm
- Important electronics for automotive safety
- Electrical fire monitoring system
