MAX6735AKASDD3+T Overview
It is mounted through 8 terminals on the power management. There is a Tape & Reel (TR)-packaging method applied to IC management. In this PMIC, you can find 1 functions for your reference. There are 1 channels on this power managment ic that can be found in a series. The purpose of this IC power is to provide you with a reference of SOT-23-8 functions. Compared to other Multi-Voltage Supervisor products, this PMIC has a lot of benefits to offer. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. When 3 is applied to the power ic, it conducts. The power management is mounted by a Surface Mount-axis. In this case, this PMIC chip can be sub-categorized as a Power Management Circuits chip. There are a total of 8 pins on power management. The pins of the power management system count 8. Supply voltage (Vsup) should be at least 800mV for this power management. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). Mounting type Surface Mount is recommended. The temperature of the supervisors should be set to this range: -40°C~125°C. As this power managment ic operates, it is able to produce an output voltage of Push-Pull, Totem Pole. It is estimated that the voltage supervisor's supply current is 15μA. You can always use MAX6735A, the base supervisor number, to search for similar PMICs of the manufacturer. A power supply of 1/5V watts is required for the operation of this power management.
MAX6735AKASDD3+T Features
Multi-Voltage Supervisor type
Minimum supply voltage of 800mV
15μA operating supply current
MAX6735AKASDD3+T Applications
There are a lot of Maxim Integrated MAX6735AKASDD3+T Voltage Supervisors applications.
- Electronics installed in the vehicle
- DC stabilized power supply module
- Automotive permanent magnet synchronous motors
- Microcontroller system
- Digitally controlled LDO regulators circuit
- Battery cars
- emergency room
- Radar
- Smartphones
- Leakage protection
