MAX16034LLB29+T Overview
As far as the mounting terminals of this voltage supervisor are concerned, it has 10 in total. A Tape & Reel (TR) package is used to package the power management. The purpose of this IC management is to provide you with a reference of 1 functions. On this supervisor, there is a series of 1 channels that can be found. As a reference, this IC power includes 10-WFDFN functions for your convenience. This IC power shares lots of benefits with other Battery Backup Circuit products. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. IC management is possible to find a succession of 1 voltages that have been checked. The power management is mounted by Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. Taking into account all of the pins, this power management has a total of 10. The pins of the power management system count 10. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 0V. The maximum supply voltage (Vsup) in this PMIC should not exceed 5.5V volts. Mounting type Surface Mount is recommended. It is recommended to set the supervisor's temperature to this range: -40°C~85°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. As far as the supply current of the power management is concerned, it is 22μA. To find similar IC managements from the manufacturer, you can always search by MAX16034. To operate this power management, you will need at least 2.5/5V volts of power.
MAX16034LLB29+T Features
Battery Backup Circuit type
Minimum supply voltage of 0V
22μA operating supply current
MAX16034LLB29+T Applications
There are a lot of Maxim Integrated MAX16034LLB29+T Voltage Supervisors applications.
- Detection of phase loss
- Solar power charger
- Multi-voltage system
- Automotive permanent magnet synchronous motors
- Functional modules
- Stable power system
- Radio
- Microprocessor system
- Set top box
- Radar
