MAX6855UK41D1+T Overview
As you can see, this power management is mounted through 5 terminals. It is packaged with Tape & Reel (TR). To assist you, this IC power includes 1 functions. It is possible to find on this power management a series of 1 channels. Please refer to power management for SC-74A, SOT-753 functions. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. IC management conducts at a voltage of 2.5V. During operation, the power ic is supplied with a voltage of 1. The mount is provided by Surface Mount. Power Management Circuits is a subcategory of this PMIC chip. The total number of pins on this power management is 5. Power managment ic pin count is 5. There should be a minimum voltage supply (Vsup) of 1.1V for this PMIC. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). The recommended mounting type for IC management is Surface Mount. Temperature setting for the supervisors should be -40°C~85°C TA. Power management has an output of Push-Pull, Totem Pole during operation. Supplied with a operating current of 7μA, this PMIC is capable of fully function as specified. A similar IC managements number of the manufacturer can always be found by using MAX6855, the base power ics number.
MAX6855UK41D1+T Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
7μA operating supply current
MAX6855UK41D1+T Applications
There are a lot of Maxim Integrated MAX6855UK41D1+T Voltage Supervisors applications.
- Analog circuit
- Military communications
- Unattended substation automation
- Electronics installed in the vehicle
- Power distribution systems of infant care room
- Consumer electronics
- emergency room
- Power distribution systems of ICU
- Detection of phase sequence
- Medical-specific insulation monitor
