MAX16024LTBL12+T Overview
A system battery like this uses an analog IC named POWER SUPPLY SUPPORT CIRCUIT. We have 1 channels available. 10 pins are attached to it. It is recommended that you mount this electrical component using Surface Mount. The family name of this electrical component is Power Management Circuits. In order for this system battery to be activated, its value cannot be less than 0. A temperature below 85°C is recommended for its use. The battery protector ic is powered by a volt of 1.8/5V. You should leave this transceiver ic set to 1.6V at all times. The power IC has a total of 10 pins. It is possible to discover the value RESET THRESHOLD VOLTAGE IS 4.63V in this smart tools battery when it is used. Voltage supply (Vsup) is 5.5V at maximum. Power supplies require voltages higher than 1.53V (Vsup). (Isup) must have a maximum current of 0.021mA. There is 1.2V voltage output from it.
MAX16024LTBL12+T Features
with 10 Pins
operate supply voltage at the range of 1.6V
Supply Voltage-Max (Vsup) : 5.5V
MAX16024LTBL12+T Applications
There are a lot of Maxim Integrated
MAX16024LTBL12+T Battery Management ICs applications.
- A/C power substations
- Internet infrastructure equipment
- Aviation ground support systems
- Tower communications
- Weather stations
- Distributed energy resources
- Solar and wind-generating plants
- Electric street sweepers
- Shuttle robots
- Robots
