MAX15046AAEE+ Overview
In the 16-SSOP (0.154, 3.90mm Width) package, the switching controller meets most application requirements. There is enough capacity in the dc motor controller to generate the output for the 1 input. PMIC is packaged in a solid enclosure of Tube. The program can handle Transistor Driver dc switching's outputs (s). 4.5V~40V is the supply voltage and the operating voltage of the dc control. Worked in a -40°C~125°C TJ dc switcher before. This switching controller can switch at 100kHz~1MHz. The Surface Mount makes it ideal for general dc dc regulator. Featured in the dcdc regulator is Current Limit, Enable, Frequency Control, Power Good which allows efficient switching control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. Different dc switching's functions can be applied to 16 terminations. A few of the control techniques these dc dc converter ics adapt include HYSTERETIC CURRENT MODE. The nominal DC switcher's voltage input is 24V. You can find other relevant dc to dc converter ics by searching "MAX15046". There are only 16 pins on switching converter. Switching converter is a type of Switching Regulator or Controllers in particular. Statistically, the DC regulator outputs 36V voltage. You should note down the dc dc regulator's usual output current of 25A when you start a project. voltage regulator dc to dcs with a 87.5 % duty cycle are designed to be reliable when powered on and powered off. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. DC regulator's maximum frequency is 1.1MHz. This value is ALSO OPERATES IN ADJUSTABLE MODE FROM 3.825V DOWN TO 0.6V; ALSO HAS PWM CNTRL TECH so that DC to DC voltage regulator better serves the purpose. In order to limit the voltage of a dc switcher whose maximum input voltage is 40V, it must be limited by the user. Voltage 4.5V is necessary for the supply. There will be 25A output current greater than 25A from the dc switcher. At its maximum, the switching converter can output 5.5V volts. At least 5V voltage is output by the voltage controller.
MAX15046AAEE+ Features
Transistor Driver Outputs
Switching Frequency: 100kHz~1MHz
Current Limit, Enable, Frequency Control, Power Good
HYSTERETIC CURRENT MODE
Max Duty Cycle: 87.5 %
ALSO OPERATES IN ADJUSTABLE MODE FROM 3.825V DOWN TO 0.6V; ALSO HAS PWM CNTRL TECH
MAX15046AAEE+ Applications
There are a lot of Maxim Integrated MAX15046AAEE+ DC to DC converter applications.
- Overvoltage protection circuits in TV sets
- Lathes
- Current source circuits
- Linear guide
- Game consoles
- Smoke prevention equipment
- Digital display device
- Adjustable voltage or current linear circuits
- Packaging
- Gear/thread machining machines
