MAX5070BAUA+ Overview
With its 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, the switching controller fits the needs of most applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. A solid enclosure of Tube surrounds pmic. The program can handle Transistor Driver dc switching's outputs (s). This dc control operates at 10.8V~30V and has a 10.8V~30V supply voltage. Qualified to work in an dc switcher with -40°C~125°C TJ. With this switching controller, you can switch at 20kHz~1MHz. As it has a Surface Mount value, it can be used for general dc dc regulator. For efficient switching control, the dcdc regulator features Frequency Control. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. DUAL are the position of the terminal of the switching converters. There are many different types of terminations for 8. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. DC switcher's input voltageis set to 15V. A search for "MAX5070" will reveal other relevant dc to dc converter ics. There are a total of 8 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. DC regulator outputs 5V voltage according to the test statistics. In most cases, the output current of the dc dc regulator will be 2A, so note that when you start the project. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 49.8 % during power-up and power-down. As DC switcher has a Surface Mount, it's suitable for most applications and prototype designs. 1MHz is the frequency of the switching controller. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 26.5V. DC switching uses 37μA when it is dormant. 26.5V is the nominal working voltage. The supply current of the voltage controller is 32μA. 3mA current flow input could be used to operate the switching converter .
MAX5070BAUA+ Features
Transistor Driver Outputs
Switching Frequency: 20kHz~1MHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 49.8 %
Frequency: 1MHz
MAX5070BAUA+ Applications
There are a lot of Maxim Integrated MAX5070BAUA+ DC to DC converter applications.
- Laboratories
- Overvoltage protection circuits in TV sets
- Direct power supply system
- Current source circuits
- CNC system
- Surface processing equipment
- Industrial controllers
- Correction machines
- Adjustable voltage or current linear circuits
- Lathes
