MAX1232MJA/883B Overview
There are 8 terminals on this power management that allow it to be mounted. A Tube package is used to package the power management. Power management is possible to find a series of 1 functions. There are 1 channels on this power managment ic that can be found in a series. Please refer to power management for 8-CDIP (0.300, 7.62mm) functions. This IC power shares lots of benefits with other Simple Reset/Power-On Reset products. During the reflow process, a peak temperature of 240 is specified for the package. There is a voltage supply of 4.5V for the PMIC chip, and the chip conducts at that voltage. IC management conducts in a 1-voltage supply. The power management is mounted by Through Hole. It has a total of 8 pins that are attached to IC management. 8 pins make up the power management. It is recommended that Vsup should not be less than 4.5V for this IC power. The maximum supply voltage (Vsup) is not to exceed 5.5V volts in this IC management. The recommended mounting type is Through Hole. The temperature of the supervisors should be set to this range: -55°C~125°C TA. During operation, this power management system outputs Open Drain or Open Collector. It is estimated that the voltage supervisor's supply current is 200μA. In addition, IC management are other features such as [0], to mention only a few. At most, voltage supervisor can operate at a supply temperature of 200μA.
MAX1232MJA/883B Features
Simple Reset/Power-On Reset type
Minimum supply voltage of 4.5V
200μA operating supply current
MAX1232MJA/883B Applications
There are a lot of Maxim Integrated MAX1232MJA/883B Voltage Supervisors applications.
- Battery cars
- Kitchen appliances
- Electronics installed in the vehicle
- DC stabilized power supply module
- Set top box
- Leakage current detection
- Battery cars
- Cloud computing
- External alarm
- Multi-voltage system
