Welcome to Hotenda.com Online Store!

logo
userjoin
Home

MAX6844UKD0+T

MAX6844UKD0+T

MAX6844UKD0+T

Maxim Integrated

0.9V5 Terminals 5-Pin MAX6844 Voltage supervisor1 Channels Min 750mV Max 1.8V

SOT-23

MAX6844UKD0+T Datasheet PDF

non-compliant

Technical Specifications

Parameter NameValue
TypeParameter
Mount Surface Mount
Mounting Type Surface Mount
Package / Case SC-74A, SOT-753
Number of Pins 5
Operating Temperature-40°C~85°C TA
PackagingTape & Reel (TR)
Published 2006
JESD-609 Code e3
Pbfree Code yes
Part StatusObsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 5
ECCN Code EAR99
Type Simple Reset/Power-On Reset
Terminal Finish Matte Tin (Sn)
Subcategory Power Management Circuits
Max Power Dissipation571mW
Technology BICMOS
Terminal Position DUAL
Terminal FormGULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 0.9V
Base Part Number MAX6844
Output Push-Pull, Totem Pole
Pin Count5
Number of Channels 1
Max Supply Voltage1.8V
Min Supply Voltage750mV
Operating Supply Current 8.1μA
Adjustable Threshold NO
Watchdog TimerNo
Reset Active High
Voltage - Threshold Adjustable/Selectable
Number of Voltages Monitored1
Reset Timeout 150μs Typical
Supply Current-Max (Isup) 0.02mA
Length 2.9mm
RoHS StatusROHS3 Compliant
Lead Free Lead Free
In-Stock:1037 items

MAX6844UKD0+T Product Details

MAX6844UKD0+T Overview


As far as the mounting terminals of this voltage supervisor are concerned, it has 5 in total. This power ic is packaged in a way that looks like a Tape & Reel (TR). Power management is possible to find a series of 1 functions. This power management is made up of 1 channels which are available in a series format. There are SC-74A, SOT-753 functions included in this PMIC so that you can refer to them. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. IC management is specified that the package peak reflow temperature should be 260. There is a voltage supply of 0.9V for the PMIC chip, and the chip conducts at that voltage. A supply voltage of 1 is used to conduct the PMIC chip. The power management is mounted by Surface Mount. A IC power such as this can be classified as a Power Management Circuits power management system. In total, IC powers are 5 pins on the board. There are 5 pins on the power managment ic. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 750mV. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 1.8V volts. Surface Mount mounting is recommended. Temperature setting for the supervisors should be -40°C~85°C TA. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. For this power management, there is an 8.1μA volt supply current. For similar manage ics search of the manufacturer, you can always refer to MAX6844, the base PMIC number.

MAX6844UKD0+T Features


Simple Reset/Power-On Reset type
Minimum supply voltage of 750mV
8.1μA operating supply current

MAX6844UKD0+T Applications


There are a lot of Maxim Integrated MAX6844UKD0+T Voltage Supervisors applications.

  • Automotive permanent magnet synchronous motors
  • Radio
  • Power distribution systems of infant care room
  • Dash board
  • Power distribution systems of CCU
  • Cloud computing
  • Digitally controlled LDO regulators circuit
  • Important electronics for automotive safety
  • Personal computers
  • Network equipment

Get Subscriber

Enter Your Email Address, Get the Latest News