DG408AK/883B Overview
The electronic component is convenient to ship overseas because it is packed in a 16-CDIP (0.300, 7.62mm). The advanced packaging method Tube provides high reliability. It is mounted in the position Through Hole. 8:1 is the ratio between multiplexers and demultiplexers. The operating temperature is extended to around -55°C~125°C TA. The total number of terminations is 16. As a result of its 8 channels, this electronic component provides high-quality output. An 15V voltage supply should allow the electrical part to be turned on and run. A total of 16 pins are injected into the body of the electronic part. The multiplexer consists of 1 circuits. The internal resistance of this digital multiplexer is 100Ohm. Datasheets for functions of 16 pins are available. Multiplexer or Switches is a typical switch device. normally, users should not supply switches with voltages higher than 30V. A low voltage of 4.5V should be applied to the electronic component. This multiplexer would work with 500μA current. For this multiplexer, dual supply voltage is feasible, but it should not exceed 20V. A dual power supply should have at least 4.5V voltage attached. With a SINGLE-ENDED MULTIPLEXER analog IC integrated into the board. A voltage of 28V can be used to operate the electronic component.
DG408AK/883B Features
8 Channels
500μA Supply Current
DG408AK/883B Applications
There are a lot of Maxim Integrated
DG408AK/883B Analog Switches & Multiplexers ICs applications.
- Low-Voltage
- Isolation
- Medical
- Imaging
- Ultrasound
- Audio and video switching
- Automatic test equipment
- Precision data acquisition
- Battery-powered systems
- Sample-and-hold systems
