DG202BDK Overview
Due to its 16-CDIP (0.300, 7.62mm) packaging, the electronic part is convenient for international shipping. High reliability is achieved by using advanced packaging method Tube. There is an analog multiplexer mounted in position Through Hole. There is 1:1 ratio between the number of multiplexers and demultiplexers. Temperatures around -40°C~85°C TA are extended for operation. 16 terminations have been made so far. The electronic part body is injected with 16 pins. Based on SPST - NO switching circuits, these analog multiplexers work. It consists of 4 circuits. There is 85Ohm internal resistance in this digital multiplexer. For details about the functions of 16 pins, please refer to the datasheets. It is a typical Multiplexer or Switches analog multiplexer. Users should never supply a voltage higher than 25V to a switch device. There should be 4.5V voltage fed to the electrical part below 4.5V. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 22V. For dual power supplies, a voltage of at least 4.5V should be attached. There are SEPARATE OUTPUT outputs on this analog switch ic.
DG202BDK Features
Switch Circuit: SPST - NO
DG202BDK Applications
There are a lot of Vishay Siliconix DG202BDK Analog Switches & Multiplexers ICs applications.
- High speed data transmission line cards
- Ultrasound
- E1 Multiplexer
- Communication systems
- Frame Relay Equipment
- Transmit
- Channelized and Unchannelized DS3 applications
- Signal routing between systems
- E1 Network Equipment
- Data switching
