Name: MAX4593CSE+
Brand: Maxim Integrated
SKU: MAX4593CSE+
Price: 7.09000 USD
Availability: InStock

new-10%

MAX4593CSE+

Manufacturer part number:MAX4593CSE+

Manufacturer:Maxim Integrated

Description:80ns, 45ns SPST - NO/NC 20Ohm DUAL Analog Switches BREAK-BEFORE-MAKE MAX4593 16 Pins 100pA 12V 16-SOIC (0.154, 3.90mm Width)

Case Package:SOT-23

Datasheet:MAX4593CSE+ Datasheet PDF

RoHs Status:non-compliant

Parameter Name	Value
Type	Parameter
Factory Lead Time	6 Weeks
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Operating Temperature	0°C~70°C TA
Packaging	Tube
Published	2000
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	16
ECCN Code	EAR99
Resistance	20Ohm
Terminal Finish	Matte Tin (Sn)
Subcategory	Multiplexer or Switches
Max Power Dissipation	696mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	4
Supply Voltage	12V
Terminal Pitch	1.27mm
[email protected] Reflow Temperature-Max (s)	30
Base Part Number	MAX4593
Output	SEPARATE OUTPUT
Pin Count	16
JESD-30 Code	R-PDSO-G16
Power Supplies	12/15V
Number of Channels	1
Number of Circuits	4
Max Supply Voltage	16V
Min Supply Voltage	3V
Operating Supply Current	1μA
Nominal Supply Current	1nA
Max Supply Current	1μA
Throw Configuration	SPST
Turn On Delay Time	80 ns
Supply Type	Single
Turn-Off Delay Time	45 ns
On-State Resistance (Max)	20Ohm
Multiplexer/Demultiplexer Circuit	1:1
Off-state Isolation-Nom	72 dB
Current - Leakage (IS(off)) (Max)	100pA
Channel Capacitance (CS(off), CD(off))	9pF 9pF
On-state Resistance Match-Nom	0.5Ohm
Switch Circuit	SPST - NO/NC
Switch Time (Ton, Toff) (Max)	80ns, 45ns
Charge Injection	2pC
Channel-to-Channel Matching (ΔRon)	500m Ω
Crosstalk	-85dB @ 10MHz
Switching	BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+)	3V~16V
Height Seated (Max)	1.75mm
Length	9.9mm
Width	3.9mm
Radiation Hardening	No
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

MAX4593CSE+ Product Details

MAX4593CSE+ Overview

Presented in 16-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. This high-reliability packaging method uses advanced packaging methods Tube. In Surface Mount, you'll find this switch device. Multiplexers and demultiplexers have a ratio of 1:1. Operation at a temperature around 0°C~70°C TA. A total of 16 terminations have been recorded. High-quality output is provided by the electronic component's 1 channels. With a 12V voltage supply, the electrical component should be turned on and run. It is injected into the electrical part body with 16 pins. A SPST - NO/NC switching circuit is used to build these analog multiplexers. It consists of 4 circuits. Try searching with MAX4593 to find analog multiplexer variants. There is 20Ohm internal resistance in this digital multiplexer. Multiplexer or Switches is a typical switch device. Multiplexers should not be powered above 16V in normal situations. Analogue multiplexer with a Single supply type that is cost-effective. 3V is the lowest voltage that should be fed to the electronic electronic part. An operating current of 1μA would be sufficient for this switch device. An analogue multiplexer drains from a single voltage supply at 3V~16V. When the digital multiplexer is charged above 1μA, damage can occur. The analog switch ic utilizes SEPARATE OUTPUT outputs in total.