71M6545HT-IGT/F Overview
This package is packed in Tray. A package called 64-LQFP. An example of its use as a 3 Phase meter would be the following. This item is available in Surface Mount. As a result of -40°C~85°C, a higher operational temperature is reached. Using a 3V~3.6V power supply, it operates as it should. It has a voltage of 0.8V for its low-level I/O ports in this PMIC. This device is capable of delivering voltages of 2V for high-level I/Os on its pins. 64 terminations are included on this part. This PMIC ANALOG CIRCUITIC is powerful. For this part, the normal voltage needed is 3.3V. The user should be aware that in order for this device to operate, it requires a voltage of 3V or higher in order to function. As far as the maximum voltage that will be applied to the device is concerned, it should be kept below 3.6V. This is a 64-switched solution that can be used for logic gate applications. With its Surface Mount design, it can be easily installed and dismounted and can be used for many projects. As a matter of fact, this is Other Analog ICs, which is the designation for specialized needs. The maximum supply current is recommended to be set at 60nA in order to make sure the PMIC keeps running normally. A memory chip can only function properly with a voltage not exceeding 6.9mA. Featured in Single Converter Technology® series. 3.3V can be used to provide power to this device. In order for this device to work, it must work at a frequency of up to 5MHz. The PMIC in this case has a memory size 64kB embedded in it. As far as memory management is concerned, the PMIC uses FLASH memory.
71M6545HT-IGT/F Features
3 Phase meter.
ANALOG CIRCUIT analog IC.
Operating maximum frequency: 5MHz.
64kB adequate size for target applications.
FLASH memory.
71M6545HT-IGT/F Applications
There are a lot of Maxim Integrated
71M6545HT-IGT/F Energy Metering ICs applications.
- Intelligent Power Distribution Units
- Telecom Infrastructure
- Industrial Equipment
- General Purpose Energy Measurement
- Power monitoring/power budgeting
- Central office equipment
- Telecommunications and data communications equipment
- PCs/servers
- Power monitoring instruments
- Poly-phase energy meters of class 0.5S and class 1
