HSDL-5420#1L1 Overview
To protect them from damage, these photodiodes are packaged in the Bulk. For safety reasons, the photodiodes are packaged in 2-SMD, Flat Lead packages. When operating in reverse-bias mode, the photodiodes should not exceed 40V. There are 2 pins on the photodiodes. In a circuit, photodiodes could release 150mW heat. In the case of photodiodes, the reverse anode voltage should be 40V. A circuit should have a maximum heat release rate of 150mW from the photodiodes. With a reverse voltage of 40V, the photodiodes can work properly in the DC circuit. Current should flow across a photodiode at 800mV voltage. In the absence of light input, a photodiode produces 1nA current.
HSDL-5420#1L1 Features
Moisture Sensitivity Level (MSL): 2A (4 Weeks)
Operating Temperature: -40°C~85°C
Packaging: Bulk
Diode Type: PIN
Mount: Through Hole
Spectral Range: 770nm ~ 1000nm
Viewing Angle: 56°
HSDL-5420#1L1 Applications
There are a lot of Lite-On Inc.
HSDL-5420#1L1 Photodiodes applications.
- Infrared remote control
- Infrared data transmission
- Photo interrupters
- Shaft encoders
- Electronic Equipment
- Industrial Automation
- Machine Controls
- Light Barriers
- Vision Controls
- Measurement Levelling
