LTC694IS8-3.3#PBF Overview
Power management is mounted through 8 terminals. There is a Tube-packaging method applied to IC management. The purpose of this IC management is to provide you with a reference of 1 functions. This power management is made up of 1 channels which are available in a series format. For your reference, this PMIC includes a list of 8-SOIC (0.154, 3.90mm Width) functions. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. Packages are specified to have an average peak reflow temperature of 260. There is a voltage supply of 3.3V for the PMIC chip, and the chip conducts at that voltage. A supply voltage of 1 is used to conduct the PMIC chip. It is possible to subcategorize this power ic as a Power Management Circuits chip. In total, the power management has 8 pins in it. Surface Mount is the recommended mounting type. We recommend setting the supervisors to -40°C~85°C TA degrees. When this power management system is in operation, it produces an output voltage of Open Drain or Open Collector. There are other features such as RESET THRESHOLD VOLTAGE IS 2.9 V to name a few. A similar IC managements number of the manufacturer can always be found by using LTC694I, the base power ics number. It is necessary to have 3.3V volts of power in order for this voltage supervisor to operate.
LTC694IS8-3.3#PBF Features
Simple Reset/Power-On Reset type
LTC694IS8-3.3#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC694IS8-3.3#PBF Voltage Supervisors applications.
- WiFi router
- Radar
- Stable power system
- Electronics installed in the vehicle
- Insulation fault location system
- Medical-specific isolation transformer
- DSP
- FPGA design
- Dash board
- Low voltage/high power - AI, GPU
