LTC3809EMSE#PBF Overview
Capsuled in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package, the switching controller suits most application needs. There is enough capacity in the dc motor controller to generate the output for the 1 input. PMIC packaging is solid with a Tube enclosure. There are Transistor Driver dc switching's output (s) that it can handle. 2.75V~9.8V is the supply voltage and the operating voltage of the dc control. Worked in a -40°C~85°C TA dc switcher before. Using this switching controller, it is possible to switch at 460kHz~635kHz. dc dc regulator can be generalized using Surface Mount. To provide efficient switching control, Enable is included in the dcdc regulator. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Terminal (s) of the switching converters are designed at the DUAL position. A variety of 10 terminations are available in dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 4.2V is input. LTC3809 can be used to locate other relevant dc to dc converter ics. Switching converter has a total of 10 pins. Specifically, switching converter falls under the Switching Regulator or Controllers category. DC regulator outputs 10V voltage according to the test statistics. In most cases, the output current of the dc dc regulator will be 1A, so note that when you start the project. Switching controllers operate at 250kHz frequencies. The maximum input voltage of this dc switcher is 9.8V, so users must limit the voltage accordingly. Input current cannot exceed 1A with this dc switcher. Datasheets state the switching converter can output up to 9.8V volts.
LTC3809EMSE#PBF Features
Transistor Driver Outputs
Switching Frequency: 460kHz~635kHz
Enable
PULSE WIDTH MODULATION
Frequency: 250kHz
LTC3809EMSE#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3809EMSE#PBF DC to DC converter applications.
- Television equipment
- Computer rooms
- Smart grid
- Driver circuits
- Computed tomography (CT)
- Hydraulic presses
- Handheld GPS
- Electrical distribution systems
- Thermal power
- Medical monitoring systems
