MAX704RCSA+ Overview
Power management is mounted through 8 terminals. Tube-packaging is used. Please find attached 1 functions for your reference in this IC power. A series of 1 channels can be found on this supervisor. In this IC management you will find 8-SOIC (0.154, 3.90mm Width) functions for you to refer to. Compared to other Battery Backup Circuit products, this PMIC has a lot of benefits to offer. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts in a 1-voltage supply. Surface Mount mounts IC management. There is a subcategory called Power Management Circuits for this power management. 8 pins are present in total in this power management. This power management has 8 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 0V. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. In this case, Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: 0°C~70°C TA. While this power management is operating, it will output Push-Pull, Totem Pole as the output voltage. There is a supply current of 350μA for the power management. To find similar IC managements from the manufacturer, you can always search by MAX704. A power supply of 3/5V watts is required for the operation of this power management.
MAX704RCSA+ Features
Battery Backup Circuit type
Minimum supply voltage of 0V
350μA operating supply current
MAX704RCSA+ Applications
There are a lot of Maxim Integrated MAX704RCSA+ Voltage Supervisors applications.
- Important electronics for automotive protection
- DSP
- Electrical fire monitoring system
- Power communication system
- DVR
- Set top box
- Network equipment
- Microprocessor system
- Kitchen appliances
- Satellite navigation
