LTC2301IDE#PBF Overview
The analogue to digital converter is designed with 12 Bits.The AD converter is embedded in the 12-WFDFN Exposed Pad package.The ADC converter is packaged in the way of Tube.The ADC converter is equipped with 1 Functions .There are 12 terminations in this electrical AD converter, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.The analogue to digital converter is powered from a supply voltage of 5V.The A/D converter has 1 channels.The is equipped with 12 pin count.The peak reflow temperature (Cel) amounts to 250 to be essentially indestructible.There are ADC, SUCCESSIVE APPROXIMATION converters based on the source input voltage and the output voltage.This electronic AD converter is mounted in the way of Surface Mount.When operating, analogue to digital converter's operating temperature should be kept at -40°C~85°C.The number of samples of audio recorded every second is 14k Hz.The input type of this electronic AD converter is Differential, Single Ended.There are External, Internal reference types differentiated on the way by which they are garbage collected. This electronic digital converter is configured in such a way that MUX-S/H-ADC.The Sample/Track and Hold component of this electronic AD converter provides a way to sample a continuously varying analog signal and to hold or freeze its value for SAMPLE time.The architecture that analogue to digital converter's core adopts is SAR.The supply/analog voltage of this electrical ADC converter is 5V, which converts alternative voltage (AC voltage) to regulated direct voltage (DC voltage) and provide regulated DC power in order to drive a load.The number of pixels of this electrical AD converter is 1.5 B, which is on a display or in a camera sensor (specifically in a digital image).This analogue to digital converter is included in Analog to Digital Converters.It belongs to LTC2301 family.There are several types of supply, categorized by Single.There is a possibility of mounting the analogue to digital converter by using the Surface Mount axis.The ADC converter operates with the maximal supply voltage of 5.25V.It operates with the minimal supply voltage of 4.75V.This electrical digital converter operates from a supply voltage of 5V.The maximal analog input voltage of this electrical AD converter is 2.048V.The ADC converter operates from 5V power supplies.As an undesirable derivative of its primary action, The heat (energy loss or waste) that this electronic or electrical digital converter produces is 17.5mW. The maximal heat (energy loss or waste) that this electronic or electrical ADC converter produces is 17.5mW.The minimal analog input voltage of this electrical AD converter is -2.048V.Selectable Address can be ensured when operating.The ADC converter consists of 1 elements.
LTC2301IDE#PBF Features
1 Functions
12 basic kinds of terminations
12 pin count
Minimal supply voltage of 4.75V
5V power supplies
1 elements
LTC2301IDE#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC2301IDE#PBF ADC applications.
- Multiplexed Data Acquisition Systems
- Digital signal processing
- GSM, EDGE, PHS, UMTS, WCDMA, CDMA2000,
- RADAR processing, digital oscilloscopes
- Communication test equipment
- Smart antenna systems
- Spectrum Analysis
- Scientific instruments
- Industrial Process Control
- High Speed Data Acquisition
