LTC1064-3CJ Overview
This product comes in the form of a 14-CDIP (0.300, 7.62mm) package.There is a type of mounting that is Through Hole for the gadget.There is a Bessel, Low Pass Switched Capacitor filter type assigned to this part.Power sources of ±2.37V~8V should work.A total of 19 14 pins are located on this board.Among all the components inside the device, the LTC1064-3 is by far the most important.There is either a cutoff or a center frequency in the device when it is operating at 95kHz frequency.Reflow reaches its peak temperature at NOT SPECIFIED when the reflow process is completed.In order to power the component at all times, a source of 7.5V must be present at all times.There are two figures referred to as 1 and A.8V is the point where the maximum supply voltage (Vsup) can be reached.There is a +-7.5V supply on the device.There is currently a working temperature of 85°C, which is the highest at the moment.The voltage of the supply, Vsup, must be larger than the voltage of the load, 2.37V.With a maximum supply temperature of 32mA, it is capable of handling a wide range of ambient temperatures.In order for it to function correctly, it should be warmer than -40°C during operation.
LTC1064-3CJ Features
Supply voltage of 7.5V
LTC1064-3CJ Applications
There are a lot of Linear Technology/Analog Devices
LTC1064-3CJ active filters applications.
- Complex Multiply-Add
- Sample Rate Converters
- Digital Down Conversion
- D/A and A/D pre/post Filtering
- Tuning Bandwidth Expansion for HSP45116 and HSP45106
- Quadrature, Complex Flterlng
- Image Processing
- Polyphase Flterng
- Adaptive Fllterlng
- Very Narrow Band Fllters
