LTC1062CJ8 Overview
Packaged in a 8-CDIP (0.300, 7.62mm) package, it is easy to install.Packaged in a Bulk format, it is a very good product.In the case of this gadget, the mounting type is Through Hole.The filter type for this part is Butterworth, Low Pass Switched Capacitor.With a power source of ±8V 5V, it should work.8-pins are present on both sides of the device.Filter is important to point out that the best component of the device is the LTC1062.In terms of frequency, it is at a cutoff or center frequency of 20kHz.During all periods of operation, 5V is used as a source of power for the component.There are a number of filters, called 1, and each filter has a unique figure.As soon as you start the machine, it should be warmer than -40°C.In the current state of affairs, 85°C represents the maximum working temperature.Filter is important to remember that 8 is the pin number of the component.A device with +-5V supplies is being used.The voltage that it needs in order to function correctly is 9V, so the voltage must be applied to it.To make this device work, a supply voltage of 2.5V must be applied.
LTC1062CJ8 Features
Supply voltage of 5V
Maximum operating temperature of 85°C
LTC1062CJ8 Applications
There are a lot of Linear Technology/Analog Devices
LTC1062CJ8 active filters applications.
- Sample Rate Converters
- Digital Down Conversion
- D/A and A/D pre/post Filtering
- Tuning Bandwidth Expansion for HSP45116 and HSP45106
- Quadrature, Complex Flterlng
- Image Processing
- Polyphase Flterng
- Adaptive Fllterlng
- Very Narrow Band Fllters
- Zoom Spectral Analysis
