LT1999CMS8-10#PBF Overview
It is packaged in an 8-TSSOP, 8-MSOP (0.118, 3.00mm Width)-case that protects the operational amplifiers from damage. An op amp of this type is a Current Sense-type. As far as the packaging is concerned, buffer op amp is delivered in a Tube case. It is estimated that there will be at least 8 terminations this year. A total of 8 pins are attached to buffer op amp. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. In total, the buffer amplifier consists of 8 pins. Op amp ic rates 500μV for input offset voltage. This electronic part is recommended for mounting type Surface Mount. In terms of operating temperature, this instrumentation amplifier is well suited to a temperature range of 0°C~70°C. A supply current of 5.8mA can be used to operate this linear amplifier. There should be no change in the voltage gain at 20.04dB. This op amp ic has 1 circuits. There are 2 elements in this buffer amplifier. The operating supply voltage of the buffer op amp is rated at 5V. It is important that the op amp resistance stays within the range of 20MOhm.
LT1999CMS8-10#PBF Features
8 Pins
supply voltage of 5V
20.04dB voltage gain
Resistance of 20MOhm
LT1999CMS8-10#PBF Applications
There are a lot of Linear Technology/Analog Devices
LT1999CMS8-10#PBF Instrumentational OP Amps applications.
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
- Power control
- Information processing
- Weak signal detection
- Signal amplification
- Signal filtering
