M4A3-192/96-7FAC Overview
192 macrocells are present in the mobile phone network, which offer radio coverage from a high-power cell tower, antenna, or mast.The item is enclosed in a 144-BGA package.The device is programmed with 96 I/O ports.It is programmed to terminate devices at 144.There is a BOTTOM terminal position on the electrical part in question.The device is powered by a voltage of 3.3V volts.It is a part of the family Programmable Logic Devices.It is recommended that the chip be packaged by Tray.Ensure its reliability by operating at 0°C~70°C TA.It is recommended to mount the chip by Surface Mount.FPGAs belonging to the ispMACH® 4A series contain this type of chip.When using this device, YES is also available.You can find its related parts in the M4A3-192.7500 gates are used to construct digital circuits.If high efficiency is desired, the supply voltage should be kept at 3.3V.It is recommended that data be stored in EEPROM.In this case, it is mounted by Surface Mount.The pins are 144.This device operates at a voltage of 3.6V when the maximum supply voltage is applied.With a minimal supply voltage of 3V, it operates.Currently, there are 67 Programmable I/Os available.It is important to make sure that the maximum frequency is less than 125MHz.The status of input signals is determined by 16 dedicated inputs.
M4A3-192/96-7FAC Features
144-BGA package
96 I/Os
The operating temperature of 0°C~70°C TA
144 pins
M4A3-192/96-7FAC Applications
There are a lot of Lattice Semiconductor Corporation
M4A3-192/96-7FAC CPLDs applications.
- Digital systems
- Portable digital devices
- Handheld digital devices
- Battery operated portable devices
- Complex programmable logic devices
- Digital designs
- Field programmable gate
- Address decoding
- D/T registers and latches
- Synchronous or asynchronous mode
